Babystep5

From OSDev.wiki
Jump to navigation Jump to search


Babystep5

Tutorial

PreviousNext
Babystep4Babystep6

Interrupts

This code is meant to show how the hardware interrupt generated when you press a key can be handled by replacing the seg:offset specified in the IVT (interrupt vector table). This normally points to a BIOS routine. To find the entry in the IVT, multiply the interrupt number by 4 (which is the size of each entry).

This key handler just displays the scan code without conversion to ASCII, buffering, or handling extended keys. The reason for doing this is to not muddle up the basic idea, which is to provide input, as well as output, in its most simple form.

I will not go into the hows and whys of reading the ports involved in a key press. Suffice it to say that you are communicating with actual chips (or parts of chips), not some software intermediary. I personally feel it is good to remember that, no matter what level of abstraction you work at, you are ultimately telling hardware what to do.

I will point out the turning the keyboard on/off through port 0x61 is given in its complete form, some of which might not be needed, depending on the system.

;==========================================
; nasmw boot.asm -f bin -o boot.bin
; partcopy boot.bin 0 200 -f0

[ORG 0x7c00]      ; add to offsets
   jmp start

   %include "print.inc"

start:   xor ax, ax   ; make it zero
   mov ds, ax   ; DS=0
   mov ss, ax   ; stack starts at 0
   mov sp, 0x9c00   ; 200h past code start

   mov ax, 0xb800   ; text video memory
   mov es, ax

   cli      ;no interruptions
   mov bx, 0x09   ;hardware interrupt #
   shl bx, 2   ;multiply by 4
   xor ax, ax
   mov gs, ax   ;start of memory
   mov [gs:bx], word keyhandler
   mov [gs:bx+2], ds ; segment
   sti

   jmp $      ; loop forever

keyhandler:
   in al, 0x60   ; get key data
   mov bl, al   ; save it
   mov byte [port60], al

   in al, 0x61   ; keybrd control
   mov ah, al
   or al, 0x80   ; disable bit 7
   out 0x61, al   ; send it back
   xchg ah, al   ; get original
   out 0x61, al   ; send that back

   mov al, 0x20   ; End of Interrupt
   out 0x20, al   ;

   and bl, 0x80   ; key released
   jnz done   ; don't repeat

   mov ax, [port60]
   mov  word [reg16], ax
   call printreg16

done:
   iret

port60   dw 0

   times 510-($-$$) db 0  ; fill sector w/ 0's
   dw 0xAA55        ; req'd by some BIOSes
;==========================================

print.inc

Just in case it wasn't clear, we have moved the printing routines from part 4 (dochar, sprint, cprint, and printreg16) into an include file, which we will name print.inc.

;==========================================
; print.inc
;----------------------



dochar:   call cprint         ; print one character
sprint:   lodsb      ; string char to AL
   cmp al, 0
   jne dochar   ; else, we're done
   add byte [ypos], 1   ;down one row
   mov byte [xpos], 0   ;back to left
   ret
 
cprint:   mov ah, 0x0F   ; attrib = white on black
   mov cx, ax    ; save char/attribute
   movzx ax, byte [ypos]
   mov dx, 160   ; 2 bytes (char/attrib)
   mul dx      ; for 80 columns
   movzx bx, byte [xpos]
   shl bx, 1    ; times 2 to skip attrib
 
   mov di, 0        ; start of video memory
   add di, ax      ; add y offset
   add di, bx      ; add x offset
 
   mov ax, cx        ; restore char/attribute
   stosw              ; write char/attribute
   add byte [xpos], 1  ; advance to right
 
   ret
 
;------------------------------------
 
printreg16:
   mov di, outstr16
   mov ax, [reg16]
   mov si, hexstr
   mov cx, 4   ;four places
hexloop:
   rol ax, 4   ;leftmost will
   mov bx, ax   ; become
   and bx, 0x0f   ; rightmost
   mov bl, [si + bx];index into hexstr
   mov [di], bl
   inc di
   dec cx
   jnz hexloop
 
   mov si, outstr16
   call sprint
 
   ret

;------------------------------------
 
xpos   db 0
ypos   db 0
hexstr   db '0123456789ABCDEF'
outstr16   db '0000', 0  ;register value string
reg16   dw    0  ; pass values to printreg16

See Also

External Links