Anonymous user
Booting Raspberry Pi 3: Difference between revisions
Jump to navigation
Jump to search
no edit summary
[unchecked revision] | [unchecked revision] |
(Created page with " This is a tutorial on bare-metal OS development on the AArch64 architecture. This article oriented to the Raspberry Pi 3, but is aimed to be as device agnostic as possible. ...") |
No edit summary |
||
Line 1:
This is a tutorial on bare-metal OS development on the AArch64 architecture. This article oriented to the Raspberry Pi 3 (RPi 3), but is aimed to be as device agnostic as possible. Therefore, some sections will be specific to the RPi 3 and will be marked.
This is the author's very first ARM system and wiki page. I learn as I write and will continue to develop this page once I feel comfortable enough at the subjet to share.
== Preamble ==
This article assumes that you have all of the necessary materials needed to begin developing on your respective hardware. Other assumptions are that you are comfortable with low-level programming using C/C++
This article is also intended for beginner users who want
== Preperations ==
A bare-metal AArch64 toolchain is available on the AUR for installation. The links are provided here as well as a download link
https://www.linaro.org/downloads/
Line 19:
https://aur.archlinux.org/packages/aarch64-elf-newlib-linaro-bin/
====RPi 3: Firmware====
== Overview ==
By now you should have your cross compiler set up. The compiler binaries have the same name as they usually would with "aarch64-elf-" prefixing them (e.x. aarch64-elf-gcc). For this example, three files are used:
*start.S -
*kernel.c -
*linker.ld -
|