Universal Host Controller Interface: Difference between revisions
Jump to navigation
Jump to search
[unchecked revision] | [unchecked revision] |
Content deleted Content added
No edit summary |
No edit summary |
||
Line 4:
The UHCI specification defines a set of I/O mapped registers that allow communication between the controller and the operating system. The base address for these registers can be found by searching the PCI controller for a specific VendorID/DeviceID combination, or for a specific ClassID/SubclassID/Interface combination. All UHCI PCI controllers will have a Class ID of 0x0C, a Subclass ID of 0x03, and an Interface value of 0x00. The PCI Configuration space for this device will contain the I/O port address information in BAR0.
== I/O Registers ==
{| {{wikitable}}
! Offset (Hex)
! Name
! Description
|-
| 00 || USBCMD || Usb Command
|-
| 02 || USBSTS || Usb Status
|-
| 00 || USBINTR || Usb Interrupt Enable
|-
| 00 || FRNUM || Frame Number
|-
| 00 || FRBASEADD || Frame List Base Address
|-
| 00 || SOFMOD|| Start Of Frame Modify
|-
| 00 || PORTSC1 || Port 1 Status/Control
|-
| 00 || PORTSC2 || Port 2 Status/Control
|-
|}
|
Revision as of 17:18, 12 January 2013
Universal Host Controller Interface (UHCI) was created by Intel as an implementation of the USB 1.0 host controller interface. Along with OHCI, it makes up the USB 1.0 standard.
Technical Details
The UHCI specification defines a set of I/O mapped registers that allow communication between the controller and the operating system. The base address for these registers can be found by searching the PCI controller for a specific VendorID/DeviceID combination, or for a specific ClassID/SubclassID/Interface combination. All UHCI PCI controllers will have a Class ID of 0x0C, a Subclass ID of 0x03, and an Interface value of 0x00. The PCI Configuration space for this device will contain the I/O port address information in BAR0.
I/O Registers
Offset (Hex) | Name | Description |
---|---|---|
00 | USBCMD | Usb Command |
02 | USBSTS | Usb Status |
00 | USBINTR | Usb Interrupt Enable |
00 | FRNUM | Frame Number |
00 | FRBASEADD | Frame List Base Address |
00 | SOFMOD | Start Of Frame Modify |
00 | PORTSC1 | Port 1 Status/Control |
00 | PORTSC2 | Port 2 Status/Control |