Floppy Disk Controller: Difference between revisions
Jump to navigation
Jump to search
[unchecked revision] | [unchecked revision] |
Content deleted Content added
Added USB comment, comments about emulation errors |
m →Controller Reset: - formatting error |
||
Line 432: | Line 432: | ||
# Wait for the resulting IRQ6. |
# Wait for the resulting IRQ6. |
||
# Send a Sense Interrupt command (required). |
# Send a Sense Interrupt command (required). |
||
# If your OS/driver never turned off polling mode (see the Configure command), then you have to send 3 more Sense Interrupt commands. |
# If your OS/driver never turned off polling mode (see the Configure command), then you have to send 3 more Sense Interrupt commands. (Alternately, you can tell if you need the extra 3 by examining the top 2 bits of the st0 byte returned by the first Sense Interrupt. If both bits are set, |
||
(Alternately, you can tell if you need the extra 3 by examining the top 2 bits of the st0 byte returned by the first Sense Interrupt. If both bits are set, |
|||
you need to send 3 more.) |
you need to send 3 more.) |
||
# If your OS/driver never sent a Lock command, then you need to send a new Configure command (the fifo information was lost in the reset). |
# If your OS/driver never sent a Lock command, then you need to send a new Configure command (the fifo information was lost in the reset). |