Ada Bare Bones: Difference between revisions
[unchecked revision] | [unchecked revision] |
m (moved Ada Bare bones to Ada Bare Bones: Follow the same naming scheme as the another Bare Bones pages) |
m (Bot: Replace deprecated source tag with syntaxhighlight) |
||
Line 32: | Line 32: | ||
The following code demonstrates setting up a directory structure for the RTS: |
The following code demonstrates setting up a directory structure for the RTS: |
||
< |
<syntaxhighlight lang="bash"> |
||
mkdir -p bare_bones/src/pc |
mkdir -p bare_bones/src/pc |
||
cd bare_bones |
cd bare_bones |
||
Line 39: | Line 39: | ||
mkdir -p rts/src |
mkdir -p rts/src |
||
mkdir -p obj |
mkdir -p obj |
||
</syntaxhighlight> |
|||
</source> |
|||
The best way to begin creating a new run-time library is to base it upon the existing source files obtained from the system GNAT installation, modifying them where necessary. |
The best way to begin creating a new run-time library is to base it upon the existing source files obtained from the system GNAT installation, modifying them where necessary. |
||
Line 45: | Line 45: | ||
The following code demonstrates copying the required files from the host system's GNAT installation's run-time library into <tt>rts/src</tt> and then creating symbolic links to <tt>rts/boards/${arch}/adainclude</tt>. Where <tt>${arch}</tt> is <tt>i386</tt>, <tt>armv6</tt>, etc. The source location will need to be modified to reflect the location of the system compiler. |
The following code demonstrates copying the required files from the host system's GNAT installation's run-time library into <tt>rts/src</tt> and then creating symbolic links to <tt>rts/boards/${arch}/adainclude</tt>. Where <tt>${arch}</tt> is <tt>i386</tt>, <tt>armv6</tt>, etc. The source location will need to be modified to reflect the location of the system compiler. |
||
< |
<syntaxhighlight lang="bash"> |
||
system_compiler_dir="/usr/lib/gcc/x86_64-linux-gnu/8" |
system_compiler_dir="/usr/lib/gcc/x86_64-linux-gnu/8" |
||
rts_dir="${PWD}/rts" |
rts_dir="${PWD}/rts" |
||
Line 56: | Line 56: | ||
ln -s "${rts_dir}/src/$f" "${rts_dir}/rts/boards/i386/adainclude/$f" |
ln -s "${rts_dir}/src/$f" "${rts_dir}/rts/boards/i386/adainclude/$f" |
||
done |
done |
||
</syntaxhighlight> |
|||
</source> |
|||
==Files== |
==Files== |
||
Line 68: | Line 68: | ||
Additionally, it is possible to apply additional global configuration files by appending the following line to the <tt>Builder</tt> package in a GNAT project file: |
Additionally, it is possible to apply additional global configuration files by appending the following line to the <tt>Builder</tt> package in a GNAT project file: |
||
< |
<syntaxhighlight lang="ada"> |
||
package Builder is |
package Builder is |
||
-- ... |
-- ... |
||
for Global_Configuration_Pragmas use "kernel.adc"; |
for Global_Configuration_Pragmas use "kernel.adc"; |
||
end Builder; |
end Builder; |
||
</syntaxhighlight> |
|||
</source> |
|||
It is also possible to instruct the compiler to apply additional files containing configuration pragmas to the current compilation using the switch <tt>-gnatec=path</tt> on the command line. These configuration pragmas are applied in addition to those found in <tt>gnat.adc</tt>, if it is present. |
It is also possible to instruct the compiler to apply additional files containing configuration pragmas to the current compilation using the switch <tt>-gnatec=path</tt> on the command line. These configuration pragmas are applied in addition to those found in <tt>gnat.adc</tt>, if it is present. |
||
Line 81: | Line 81: | ||
See below for a list of restriction pragmas useful for a bare bones kernel and runtime: |
See below for a list of restriction pragmas useful for a bare bones kernel and runtime: |
||
< |
<syntaxhighlight lang="ada"> |
||
pragma Discard_Names; |
pragma Discard_Names; |
||
pragma Restrictions (No_Enumeration_Maps); |
pragma Restrictions (No_Enumeration_Maps); |
||
Line 95: | Line 95: | ||
pragma Restrictions (No_Implicit_Dynamic_Code); |
pragma Restrictions (No_Implicit_Dynamic_Code); |
||
pragma Restrictions (No_Secondary_Stack); |
pragma Restrictions (No_Secondary_Stack); |
||
</syntaxhighlight> |
|||
</source> |
|||
'''Note:''' ''Do not use <tt>pragma No_Run_Time</tt>. It is obsolete.'' |
'''Note:''' ''Do not use <tt>pragma No_Run_Time</tt>. It is obsolete.'' |
||
Line 107: | Line 107: | ||
| Discard_Names || The Ada compiler automatically generates strings containing the names of enumerated data types, among others. These strings can be used in I/O. |
| Discard_Names || The Ada compiler automatically generates strings containing the names of enumerated data types, among others. These strings can be used in I/O. |
||
< |
<syntaxhighlight lang="ada"> |
||
type Fruit is (Orange, Banana, Apple); |
type Fruit is (Orange, Banana, Apple); |
||
-- Ada defines the following strings, "Orange", "Banana" and "Apple" in an array. |
-- Ada defines the following strings, "Orange", "Banana" and "Apple" in an array. |
||
Line 114: | Line 114: | ||
Put (Fruit'Image (Orange)); |
Put (Fruit'Image (Orange)); |
||
-- Prints "Orange" to the console. |
-- Prints "Orange" to the console. |
||
</syntaxhighlight> |
|||
</source> |
|||
This directive instructs the compiler not to generate these strings. |
This directive instructs the compiler not to generate these strings. |
||
Line 161: | Line 161: | ||
Passing the <tt>-r</tt> flag to the binder instructs it to emit a list of further restrictions that are possible to apply to the project. |
Passing the <tt>-r</tt> flag to the binder instructs it to emit a list of further restrictions that are possible to apply to the project. |
||
< |
<syntaxhighlight lang="ada"> |
||
package Binder is |
package Binder is |
||
for Default_Switches ("Ada") use ("-r"); |
for Default_Switches ("Ada") use ("-r"); |
||
end Binder; |
end Binder; |
||
</syntaxhighlight> |
|||
</source> |
|||
===system.ads=== |
===system.ads=== |
||
Line 187: | Line 187: | ||
Also, add the following line in the private part of the package: |
Also, add the following line in the private part of the package: |
||
< |
<syntaxhighlight lang="ada"> |
||
private |
private |
||
Run_Time_Name : constant String := "Bare Bones Run Time"; |
Run_Time_Name : constant String := "Bare Bones Run Time"; |
||
</syntaxhighlight> |
|||
</source> |
|||
According to targparm.ads, it must be the first thing after the private keyword. It should also show up in error messages in parentheses, but I've not managed to get it to show up thus far. This is useful as it should show you which RTS you are currently using, just in case you configure your build incorrectly. |
According to targparm.ads, it must be the first thing after the private keyword. It should also show up in error messages in parentheses, but I've not managed to get it to show up thus far. This is useful as it should show you which RTS you are currently using, just in case you configure your build incorrectly. |
||
Line 205: | Line 205: | ||
====last_chance_handler.ads==== |
====last_chance_handler.ads==== |
||
< |
<syntaxhighlight lang="ada"> |
||
with System; |
with System; |
||
Line 211: | Line 211: | ||
(Source_Location : System.Address; Line : Integer); |
(Source_Location : System.Address; Line : Integer); |
||
pragma Export (C, Last_Chance_Handler, "__gnat_last_chance_handler"); |
pragma Export (C, Last_Chance_Handler, "__gnat_last_chance_handler"); |
||
</syntaxhighlight> |
|||
</source> |
|||
====last_chance_handler.adb==== |
====last_chance_handler.adb==== |
||
< |
<syntaxhighlight lang="ada"> |
||
procedure Last_Chance_Handler |
procedure Last_Chance_Handler |
||
(Source_Location : System.Address; Line : Integer) is |
(Source_Location : System.Address; Line : Integer) is |
||
Line 225: | Line 225: | ||
end loop; |
end loop; |
||
end Last_Chance_Handler; |
end Last_Chance_Handler; |
||
</syntaxhighlight> |
|||
</source> |
|||
The contents of the <tt>Last_Chance_Handler</tt> procedure will need to be tailored to the specific platform of the kernel. Typically this procedure will dump information regarding the exception to output media such as a [[Serial_Ports|serial port]]. |
The contents of the <tt>Last_Chance_Handler</tt> procedure will need to be tailored to the specific platform of the kernel. Typically this procedure will dump information regarding the exception to output media such as a [[Serial_Ports|serial port]]. |
||
Line 233: | Line 233: | ||
Create a file called <tt>gnat.gpr</tt> in the root directory with the following contents: |
Create a file called <tt>gnat.gpr</tt> in the root directory with the following contents: |
||
< |
<syntaxhighlight lang="ada"> |
||
library project gnat is |
library project gnat is |
||
type Arch_Name is ("i386", "arm"); |
type Arch_Name is ("i386", "arm"); |
||
Line 274: | Line 274: | ||
for Library_Dir use "rts/boards/" & Arch & "/adalib"; |
for Library_Dir use "rts/boards/" & Arch & "/adalib"; |
||
end gnat; |
end gnat; |
||
</syntaxhighlight> |
|||
</source> |
|||
Now compile with the following command: |
Now compile with the following command: |
||
< |
<syntaxhighlight lang="bash"> |
||
gprbuild -XBoard=pc -Pgnat.gpr |
gprbuild -XBoard=pc -Pgnat.gpr |
||
</syntaxhighlight> |
|||
</source> |
|||
Inside <tt>rts/boards/i386/adainclude/</tt> the RTS sources should be symbolically linked along with the custom <tt>last_chance_hander</tt> and system files. Inside <tt>rts/boards/i386/adalib/</tt> there should be the <tt>libgnat-4.6.a</tt> file as well as <tt>*.ali</tt> matching the source files, which are required by GNAT. |
Inside <tt>rts/boards/i386/adainclude/</tt> the RTS sources should be symbolically linked along with the custom <tt>last_chance_hander</tt> and system files. Inside <tt>rts/boards/i386/adalib/</tt> there should be the <tt>libgnat-4.6.a</tt> file as well as <tt>*.ali</tt> matching the source files, which are required by GNAT. |
||
Line 357: | Line 357: | ||
====console.ads==== |
====console.ads==== |
||
< |
<syntaxhighlight lang="ada"> |
||
with System; |
with System; |
||
Line 476: | Line 476: | ||
procedure Clear (Background : in Background_Colour := Black); |
procedure Clear (Background : in Background_Colour := Black); |
||
end Console; |
end Console; |
||
</syntaxhighlight> |
|||
</source> |
|||
====console.adb==== |
====console.adb==== |
||
< |
<syntaxhighlight lang="ada"> |
||
package body Console is |
package body Console is |
||
procedure Put |
procedure Put |
||
Line 519: | Line 519: | ||
end Clear; |
end Clear; |
||
end Console; |
end Console; |
||
</syntaxhighlight> |
|||
</source> |
|||
===bare_bones.adb=== |
===bare_bones.adb=== |
||
Line 525: | Line 525: | ||
This is platform independent and therefore goes into the src directory. |
This is platform independent and therefore goes into the src directory. |
||
< |
<syntaxhighlight lang="ada"> |
||
with Console; use Console; |
with Console; use Console; |
||
Line 537: | Line 537: | ||
end Bare_Bones; |
end Bare_Bones; |
||
pragma No_Return (Bare_Bones); |
pragma No_Return (Bare_Bones); |
||
</syntaxhighlight> |
|||
</source> |
|||
===linker.ld=== |
===linker.ld=== |
||
Line 585: | Line 585: | ||
Place this file in the root directory. |
Place this file in the root directory. |
||
< |
<syntaxhighlight lang="make"> |
||
ARCH = i386 |
ARCH = i386 |
||
RTS_DIR = `pwd`/rts/boards/$(ARCH) |
RTS_DIR = `pwd`/rts/boards/$(ARCH) |
||
Line 613: | Line 613: | ||
clean: |
clean: |
||
-rm obj/* *~ bare_bones |
-rm obj/* *~ bare_bones |
||
</syntaxhighlight> |
|||
</source> |
|||
===bare_bones.gpr=== |
===bare_bones.gpr=== |
||
Line 619: | Line 619: | ||
Place this file in the root directory. |
Place this file in the root directory. |
||
< |
<syntaxhighlight lang="ada"> |
||
project Bare_Bones is |
project Bare_Bones is |
||
type Arch_Name is ("i386", "arm"); |
type Arch_Name is ("i386", "arm"); |
||
Line 674: | Line 674: | ||
end Linker; |
end Linker; |
||
end Bare_Bones; |
end Bare_Bones; |
||
</syntaxhighlight> |
|||
</source> |
|||
==Raspberry Pi== |
==Raspberry Pi== |
||
Line 698: | Line 698: | ||
< |
<syntaxhighlight lang="bash"> |
||
git clone git://github.com/gonzoua/u-boot-pi.git |
git clone git://github.com/gonzoua/u-boot-pi.git |
||
cd u-boot-pi |
cd u-boot-pi |
||
make rpi_b_config |
make rpi_b_config |
||
</syntaxhighlight> |
|||
</source> |
|||
==Testing== |
==Testing== |
||
Line 709: | Line 709: | ||
Make sure you have built the RTS above before this next stage otherwise you won't be able to compile the kernel. |
Make sure you have built the RTS above before this next stage otherwise you won't be able to compile the kernel. |
||
< |
<syntaxhighlight lang="bash"> |
||
make qemu |
make qemu |
||
</syntaxhighlight> |
|||
</source> |
|||
On the QEMU window, it should clear the screen, the the cursor won't move so it will be in the middle of the screen, in the top-left corner will be the message "Hello, bare bones in Ada." |
On the QEMU window, it should clear the screen, the the cursor won't move so it will be in the middle of the screen, in the top-left corner will be the message "Hello, bare bones in Ada." |
Revision as of 04:22, 9 June 2024
The aim of this tutorial is to produce a small Multiboot kernel written in the Ada programming language.
Preface
One of the first things people ask on the Ada IRC channel on Freenode is "Can Ada be used for OS development?" to which the answer is a resounding yes.
Prerequisites
The following section details the prerequisite software necessary for successfully building the kernel.
Cross-Compiler
- Main article: GNAT Cross-Compiler
This tutorial requires the use of a cross-compiler with Ada support targeting the i686-elf architecture. Theoretically, any Ada compiler capable of producing bare-metal ELF binaries for this architecture is suitable. The recommended compiler is GNAT, which is part of the GNU Compiler Collection maintained by the Free Software Foundation. Historically it was difficult to create cross-compiler builds for GNAT, but recent versions of GCC have made this much simpler. For a tutorial on how to set up a GNAT cross-compiler, refer to this article.
GPRbuild
This tutorial will require the use of the GPRBuild utility to build GNAT project files. GPRbuild is a generic build tool designed for the construction of multi-language systems. It is included with AdaCore's distribution of their proprietary GNAT compiler: [1] or can be built from source files obtained from AdaCore's github profile. Older versions of GNAT distributed by the Free Software Foundation were able to build GNAT project files using the gnatmake utility, however newer versions do not support all the required features.
The cross-compiler mentioned above will need to be properly integrated with GPRbuild and its associated tools. This can be accomplished by following the guide detailed here.
Ada run-time library
- Main article: Ada Runtime Library
The Ada run-time library is responsible for the implementation of the standard library as defined in the Ada Language Reference Manual. Not all features outlined in the reference manual need to be implemented for every platform. Since the kernel will be running in a freestanding environment without the support of an underlying operating system, it will be built with what is known as a a zero-footprint run-time system (commonly abbreviated as 'ZFP'). A zero-footprint RTS will typically provide only the bare-minimum functionality for the target architecture.
The following steps will detail how to create an initial zero-footprint runtime library suitable for building the kernel.
The first step is to set up the directory structure to hold the runtime library. GNAT expects the runtime library to conform to the a set directory structure. It requires the presence of two directories: adalib and adainclude. adainclude contains the runtime package specifications and source files, which are used analogously to include files in C. adalib contains the compiled binary artifacts of the runtime library.
The following code demonstrates setting up a directory structure for the RTS:
mkdir -p bare_bones/src/pc
cd bare_bones
mkdir -p rts/boards/i386/adalib
mkdir -p rts/boards/i386/adainclude
mkdir -p rts/src
mkdir -p obj
The best way to begin creating a new run-time library is to base it upon the existing source files obtained from the system GNAT installation, modifying them where necessary.
The following code demonstrates copying the required files from the host system's GNAT installation's run-time library into rts/src and then creating symbolic links to rts/boards/${arch}/adainclude. Where ${arch} is i386, armv6, etc. The source location will need to be modified to reflect the location of the system compiler.
system_compiler_dir="/usr/lib/gcc/x86_64-linux-gnu/8"
rts_dir="${PWD}/rts"
for f in "ada.ads" "a-unccon.ads" "a-uncdea.ads" "gnat.ads" "g-souinf.ads" \
"interfac.ads" "s-atacco.adb" "s-atacco.ads" "s-maccod.ads" "s-stoele.adb" \
"s-stoele.ads"
do
cp "${system_compiler_dir}/adainclude/$f" "${rts_dir}/src/"
ln -s "${rts_dir}/src/$f" "${rts_dir}/rts/boards/i386/adainclude/$f"
done
Files
gnat.adc
During compilation the GNAT compiler will search for a file named gnat.adc within the current working directory. This file is expected to contain one or more configuration pragmas that will be applied to the current compilation. These pragma directives instruct the compiler what features of the runtime should be restricted. This is of particular importance to kernel development since many of Ada's features are not supported by a freestanding, bare-metal environment.
These pragma directives can alternatively be placed at the start of the runtime library's system.ads file (see below), however convention dictates using the gnat.adc file for this purpose.
Additionally, it is possible to apply additional global configuration files by appending the following line to the Builder package in a GNAT project file:
package Builder is
-- ...
for Global_Configuration_Pragmas use "kernel.adc";
end Builder;
It is also possible to instruct the compiler to apply additional files containing configuration pragmas to the current compilation using the switch -gnatec=path on the command line. These configuration pragmas are applied in addition to those found in gnat.adc, if it is present. More information on configuration files can be found in the GNAT documentation: [2]
The GNAT Reference Manual and the Ada Reference Manual provide information on the various configuration pragmas. See below for a list of restriction pragmas useful for a bare bones kernel and runtime:
pragma Discard_Names;
pragma Restrictions (No_Enumeration_Maps);
pragma Normalize_Scalars;
pragma Restrictions (No_Exception_Propagation);
pragma Restrictions (No_Finalization);
pragma Restrictions (No_Tasking);
pragma Restrictions (No_Protected_Types);
pragma Restrictions (No_Delay);
pragma Restrictions (No_Recursion);
pragma Restrictions (No_Allocators);
pragma Restrictions (No_Dispatch);
pragma Restrictions (No_Implicit_Dynamic_Code);
pragma Restrictions (No_Secondary_Stack);
Note: Do not use pragma No_Run_Time. It is obsolete.
Below is an explanation of these configuration pragmas:
Restriction | Purpose |
---|---|
Discard_Names | The Ada compiler automatically generates strings containing the names of enumerated data types, among others. These strings can be used in I/O.
type Fruit is (Orange, Banana, Apple);
-- Ada defines the following strings, "Orange", "Banana" and "Apple" in an array.
-- These strings can be accessed using the 'Image attribute, as in
Put (Fruit'Image (Orange));
-- Prints "Orange" to the console.
This directive instructs the compiler not to generate these strings. |
Normalize_Scalars | Forces all scalars to be initialised. Refer to GNAT RM:Normalize_Scalars for more information. |
No_Exception_Propagation | This directive forces the compiler to disallow any attempt to raise an exception over a subprogram boundary. Refer to GNAT RM:No_Exception_Propagation for more information.
Note: The GNAT High Integrity Edition documentation states the following:
All exceptions that are not handled with an explicit exception handler within its subprogram will be caught with the Last_Chance_Handler subprogram. This will cause a warning to be issued at compile time. |
No_Exception_Registration | Ensures no stream operations are performed on types declared in Ada.Exceptions. See GNAT RM:No_Exception_Registration for more information. |
No_Finalization | Restricts the use of controlled types. Refer to GNAT RM:No_Finalization for more information. |
No_Tasking | This directive restricts all features related to tasking, including the use of protected objects. Refer to GNAT RM:No_Tasking for more information. |
No_Protected_Types | This reinforces the above restriction. Refer to GNAT RM:No_Protected_Types for more information. |
No_Delay | Restricts the use of delay statements or the calendar package. Refer to GNAT RM:No_Delay for more information. |
No_Recursion | Restricts the use of recursion. Refer to GNAT RM:No_Recursion for more information. |
No_Allocators | Restricts the use of dynamic memory. This is essential for a bare-metal application, since there is no underlying facility for allocation of dynamic memory. Refer to GNAT RM:No_Allocators for more information. |
No_Dispatch | Disallows calling a subprogram using Ada's object-orientated mechanism. Refer to GNAT RM:No_Dispatch for more information. |
No_Implicit_Dynamic_Code | Disallows nested subprograms or any other features that generate trampolines on the stack. Refer to GNAT RM:No_Implicit_Dynamic_Code for more information. |
No_Secondary_Stack | Ada uses a secondary stack to return unconstrained types, such as arbitrary length strings or variant records. This directive instructs the compiler that there is no secondary stack present, and to restrict the use of code that requires one. Refer to GNAT RM:No_Secondary_Stack for more information. |
Passing the -r flag to the binder instructs it to emit a list of further restrictions that are possible to apply to the project.
package Binder is
for Default_Switches ("Ada") use ("-r");
end Binder;
system.ads
Every Ada program must have access to the System package, this essentially tells the compiler what kind of hardware we are building for, therefore there will be 1 system.ads file per architecture your kernel supports.
Copy a system.ads from GCC that matches the target you are working with, in our case this is gcc-<version>/gcc/ada/system-linux-x86.ads, name it system.ads and place it into rts/boards/i386/adainclude/ we need to edit this a bit.
We don't need to change anything from the top as all the integer sizes should be correct. Go to the private part of the spec and change the following values:
- Command_Line_Args => False
- Configurable_Run_Time => True
- Exit_Status_Supported => False
- Stack_Check_Probes => False
- Suppress_Standard_Library => True
- ZCX_By_Default => False
- GCC_ZCX_Support => False
For more information on these options, see gcc-<version>/gcc/ada/targparm.ads.
Also, add the following line in the private part of the package:
private
Run_Time_Name : constant String := "Bare Bones Run Time";
According to targparm.ads, it must be the first thing after the private keyword. It should also show up in error messages in parentheses, but I've not managed to get it to show up thus far. This is useful as it should show you which RTS you are currently using, just in case you configure your build incorrectly.
Last chance handler
The Ada runtime requires the presence of a Last_Chance_Handler subprogram. This subprogram is used as a handler for any exceptions that are not explicitly handled within their subprogram. These calls to the Last_Chance_Handler procedure in the case of unhandled exceptions will be automatically generated by the compiler.
In order to facilitate this the last chance handler procedure must be defined somewhere within the program. Typically this is defined within the runtime. The last chance handler procedure may have any name, however the compiler will search for a procedure with external linkage with the name __gnat_last_chance_handler.
Create the following files in the rts/boards/${arch}/adainclude:
last_chance_handler.ads
with System;
procedure Last_Chance_Handler
(Source_Location : System.Address; Line : Integer);
pragma Export (C, Last_Chance_Handler, "__gnat_last_chance_handler");
last_chance_handler.adb
procedure Last_Chance_Handler
(Source_Location : System.Address; Line : Integer) is
pragma Unreferenced (Source_Location, Line);
begin
-- TODO: Add in board-specific code to dump exception information to serial/screen.
loop
null;
end loop;
end Last_Chance_Handler;
The contents of the Last_Chance_Handler procedure will need to be tailored to the specific platform of the kernel. Typically this procedure will dump information regarding the exception to output media such as a serial port.
Compiling the runtime
Create a file called gnat.gpr in the root directory with the following contents:
library project gnat is
type Arch_Name is ("i386", "arm");
type Board_Name is ("pc", "rpi");
Arch : Arch_Name := "i386";
Board : Board_Name := external ("Board");
case Board is
when "pc" =>
Arch := "i386";
when "rpi" =>
Arch := "arm";
end case;
for Source_Dirs use ("rts/boards/" & Arch & "/adainclude");
for Object_Dir use "obj"; --"rts/boards/" & Arch & "/adalib";
package Builder is
Basic_Switches := ("-gnat2005", "-g", "-x", "-a", "-gnatg",
"-gnatec=../gnat.adc");
case Board is
when "pc" =>
for Default_Switches ("Ada") use Basic_Switches &
("-m32", "-march=i386");
when "rpi" =>
for Default_Switches ("Ada") use Basic_Switches &
("-march=armv6zk", "-mfpu=vfp", "-mfloat-abi=hard", "-marm",
"-mcpu=arm1176jzf-s", "-mtune=arm1176jzf-s");
end case;
end Builder;
package Compiler is
for Default_Switches ("Ada") use ("-O2", "-ffunction-sections", "-fdata-sections");
end Compiler;
for Library_Kind use "static";
for Library_Name use "gnat-4.6";
for Library_Dir use "rts/boards/" & Arch & "/adalib";
end gnat;
Now compile with the following command:
gprbuild -XBoard=pc -Pgnat.gpr
Inside rts/boards/i386/adainclude/ the RTS sources should be symbolically linked along with the custom last_chance_hander and system files. Inside rts/boards/i386/adalib/ there should be the libgnat-4.6.a file as well as *.ali matching the source files, which are required by GNAT.
Note: Please note that the above lib might need it's name changed as some OSes might have built libgnat with a version number different to the one used here. The system libnat version may be libgnat-4.4.a and GNAT will expect to find that, so change the name in the GPR file accordingly.
startup.s
This is the main system bootstrapping code. This version is PC specific, so place this in the src/pc directory.
Note: This source file is written using GAS syntax.
.global startup # Make the startup entry point symbol visible to the linker
# Set up the Multiboot header (see GRUB docs for details)
.set ALIGN, 1<<0 # Align loaded modules on page boundaries
.set MEMINFO, 1<<1 # Provide memory map
.set FLAGS, ALIGN | MEMINFO # This is the Multiboot 'flag' field
.set MAGIC, 0x1BADB002 # 'magic number' lets your bootloader find the header
.set CHECKSUM, -(MAGIC + FLAGS) # Checksum required
header: # Must be in the first 8kb of the kernel file
.align 4, 0x90 # Pad the location counter (in the current subsection) to a 4-byte
# storage boundary. The way alignment is specified can vary with
# host system architecture.
.long MAGIC
.long FLAGS
.long CHECKSUM
# Reserve initial kernel stack space
.set STACKSIZE, 0x4000 # 0x4000 being 16k.
.lcomm stack, STACKSIZE # Reserve 16k stack on a32-bit boundary
.comm mbd, 4 # Declare common symbol mbd, allocate it 4-bytes of
# uninitialized memory.
.comm magic, 4 # Declare common symbol magic, allocate it 4-bytes of
# uninitialized memory.
startup:
movl $(stack + STACKSIZE), %esp # Set up the stack
# The following saves the contents of the registers as they will likely be
# overwritten because main is not our actual entry point, Bare_Bones is. We
# will use these 2 symbols inside Bare_Bones.
movl %eax, magic # EAX indicates to the OS that it was loaded by a Multiboot-compliant boot
# loader
movl %ebx, mbd # EBX must contain the physical address of the Multiboot information
# structure
call main # Call main (created by gnatbind)
cli # Disable interrupts. then intentionally hang the system.
# CLI only affects the interrupt flag for the processor on which it is
# executed.
hang:
hlt # Because the HLT instruction halts until an interrupt occurs, the
# combination of a CLI followed by a HLT is used to intentionally hang
# the computer if the kernel returns.
# HLT is in a loop just in case a single HLT instruction fails to execute
# for some reason, (such as in the case of an NMI).
jmp hang
multiboot.ads
I won't show the source to this package as I have made it more Ada-like and it's quite large, so I will link to the current versions, multiboot.ads and multiboot.adb.
Console
Disclaimer: I wrote this package a long time ago and have reformatted it using my current Ada programming style. I have not gone too far into the code, so it may not be the best implementation of an console.
The following 2 files give you access to the VGA console at 80x25 characters. As they are PC specific, they go into the src/pc directory.
console.ads
with System;
package Console is
pragma Preelaborate (Console);
type Background_Colour is
(Black,
Blue,
Green,
Cyan,
Red,
Magenta,
Brown,
Light_Grey);
for Background_Colour use
(Black => 16#0#,
Blue => 16#1#,
Green => 16#2#,
Cyan => 16#3#,
Red => 16#4#,
Magenta => 16#5#,
Brown => 16#6#,
Light_Grey => 16#7#);
for Background_Colour'Size use 4;
type Foreground_Colour is
(Black,
Blue,
Green,
Cyan,
Red,
Magenta,
Brown,
Light_Grey,
Dark_Grey,
Light_Blue,
Light_Green,
Light_Cyan,
Light_Red,
Light_Magenta,
Yellow,
White);
for Foreground_Colour use
(Black => 16#0#,
Blue => 16#1#,
Green => 16#2#,
Cyan => 16#3#,
Red => 16#4#,
Magenta => 16#5#,
Brown => 16#6#,
Light_Grey => 16#7#,
Dark_Grey => 16#8#,
Light_Blue => 16#9#,
Light_Green => 16#A#,
Light_Cyan => 16#B#,
Light_Red => 16#C#,
Light_Magenta => 16#D#,
Yellow => 16#E#,
White => 16#F#);
for Foreground_Colour'Size use 4;
type Cell_Colour is
record
Foreground : Foreground_Colour;
Background : Background_Colour;
end record;
for Cell_Colour use
record
Foreground at 0 range 0 .. 3;
Background at 0 range 4 .. 7;
end record;
for Cell_Colour'Size use 8;
type Cell is
record
Char : Character;
Colour : Cell_Colour;
end record;
for Cell'Size use 16;
Screen_Width : constant Natural := 80;
Screen_Height : constant Natural := 25;
subtype Screen_Width_Range is Natural range 1 .. Screen_Width;
subtype Screen_Height_Range is Natural range 1 .. Screen_Height;
type Row is array (Screen_Width_Range) of Cell;
type Screen is array (Screen_Height_Range) of Row;
Video_Memory : Screen;
for Video_Memory'Address use System'To_Address (16#000B_8000#);
pragma Import (Ada, Video_Memory);
procedure Put
(Char : in Character;
X : in Screen_Width_Range;
Y : in Screen_Height_Range;
Foreground : in Foreground_Colour := White;
Background : in Background_Colour := Black);
procedure Put
(Str : in String;
X : in Screen_Width_Range;
Y : in Screen_Height_Range;
Foreground : in Foreground_Colour := White;
Background : in Background_Colour := Black);
procedure Clear (Background : in Background_Colour := Black);
end Console;
console.adb
package body Console is
procedure Put
(Char : in Character;
X : in Screen_Width_Range;
Y : in Screen_Height_Range;
Foreground : in Foreground_Colour := White;
Background : in Background_Colour := Black) is
begin
Video_Memory (Y)(X).Char := Char;
Video_Memory (Y)(X).Colour.Foreground := Foreground;
Video_Memory (Y)(X).Colour.Background := Background;
end Put;
procedure Put
(Str : in String;
X : in Screen_Width_Range;
Y : in Screen_Height_Range;
Foreground : in Foreground_Colour := White;
Background : in Background_Colour := Black) is
begin
for Index in Str'First .. Str'Last loop
Put (Str (Index),
X + Screen_Width_Range (Index) - 1,
Y,
Foreground,
Background);
end loop;
end Put;
procedure Clear (Background : in Background_Colour := Black) is
begin
for X in Screen_Width_Range'First .. Screen_Width_Range'Last loop
for Y in Screen_Height_Range'First .. Screen_Height_Range'Last loop
Put (' ', X, Y, Background => Background);
end loop;
end loop;
end Clear;
end Console;
bare_bones.adb
This is platform independent and therefore goes into the src directory.
with Console; use Console;
procedure Bare_Bones is
begin
Clear;
Put ("Hello, bare bones in Ada.",
Screen_Width_Range'First,
Screen_Height_Range'First);
end Bare_Bones;
pragma No_Return (Bare_Bones);
linker.ld
This is a PC specific script so goes into the src/pc directory.
OUTPUT_FORMAT(elf32-i386) /* Tell the linker which startup code to use, we do this as there is no way to do this (well not easily) from the GNAT tools. */ STARTUP(startup.o) ENTRY (startup) SECTIONS { . = 0x00100000; .text :{ code = .; _code = .; __code = .; *(.text) *(.rodata) } .rodata ALIGN (0x1000) : { *(.rodata) } .data ALIGN (0x1000) : { data = .; _data = .; __data = .; *(.data) } .bss : { sbss = .; bss = .; _bss = .; __bss = .; *(COMMON) *(.bss) ebss = .; } end = .; _end = .; __end = .; }
makefile
Place this file in the root directory.
ARCH = i386
RTS_DIR = `pwd`/rts/boards/$(ARCH)
ifeq ($(ARCH),i386)
GPRBUILD = gprbuild
AS = as
ASFLAGS = --32 -march=i386
OBJS = obj/startup.o obj/multiboot.o obj/console.o
BOARD = pc
.PHONY: obj/multiboot.o obj/console.o
endif
all: bare_bones
bare_bones: $(OBJS) src/bare_bones.adb
$(GPRBUILD) --RTS=$(RTS_DIR) -XBoard=$(BOARD) -Pbare_bones.gpr
obj/startup.o: src/$(BOARD)/startup.s
$(AS) $(ASFLAGS) src/$(BOARD)/startup.s -o obj/startup.o
.PHONY: clean
clean:
-rm obj/* *~ bare_bones
bare_bones.gpr
Place this file in the root directory.
project Bare_Bones is
type Arch_Name is ("i386", "arm");
type Board_Name is ("pc", "rpi");
Arch : Arch_Name := "i386";
Board : Board_Name := external ("Board");
-- TODO: Add in a case statement that adds an arch dir to source.
case Board is
when "pc" =>
for Source_Dirs use ("src", "src/pc");
when "rpi" =>
for Source_Dirs use ("src", "src/rpi");
end case;
for Object_Dir use "obj";
for Exec_Dir use ".";
for Main use ("bare_bones.adb");
package Builder is
Basic_Switches := ("-gnat2005", "-g", "-x", "-a", "-gnatg",
"-gnatec=../gnat.adc", "-gnaty-I", "-gnaty+d");
case Board is
when "pc" =>
for Default_Switches ("Ada") use Basic_Switches &
("-m32", "-march=i386");
when "rpi" =>
for Default_Switches ("Ada") use Basic_Switches &
("-march=armv6zk", "-mfpu=vfp", "-mfloat-abi=hard", "-marm",
"-mcpu=arm1176jzf-s", "-mtune=arm1176jzf-s");
end case;
end Builder;
package Compiler is
case Board is
when "pc" =>
for Default_Switches ("Ada") use
("-O0", "-g", "-ggdb", "-ffunction-sections", "-fdata-sections");
when "rpi" =>
for Default_Switches ("Ada") use
("-O0", "-g", "-ggdb", "-ffunction-sections", "-fdata-sections");
end case;
end Compiler;
-- To reduce size of final binary.
package Linker is
for Default_Switches ("Ada") use
("-Wl,--gc-sections", "-static", "-nostartfiles", "-nodefaultlibs",
"-T../src/" & Board & "/linker.ld", "-v");
end Linker;
end Bare_Bones;
Raspberry Pi
Boot process
As stated in [3], the RPi boot proces is as follows:
- Power on starts the stage 1 boot loader which is on the SoC, which loads the stage 2 boot loader (bootcode.bin) into L2 cache (thus turning it on).
- bootcode.bin enables SDRAM and loads the stage 3 boot loader (loader.bin).
- loader.bin loads and executes the VideoCore firmware (start.elf).
- start.elf loads config.txt, cmdline.txt and kernel.img.
The config.txt file can contain aline "kernel=<name>" where you can name the kernel image anything you like.
Ideally for development we would use an emulator or some kind of netbooting facility so we don't have to keep switching the SD Card from the Pi to the PC and vice versa, this would get tedious really fast.
U-Boot
Seems you need serial access to the board to do this, so I won't be atempting this yet.
By following the information starting on the FreeBSD porting page, we can build u-boot for RPi.
git clone git://github.com/gonzoua/u-boot-pi.git
cd u-boot-pi
make rpi_b_config
Testing
Make sure you have built the RTS above before this next stage otherwise you won't be able to compile the kernel.
make qemu
On the QEMU window, it should clear the screen, the the cursor won't move so it will be in the middle of the screen, in the top-left corner will be the message "Hello, bare bones in Ada."
Source access
I have created a Git repository on GitHub containing the source above so you don't have to do it by hand if you don't want to.
In fact there have ben a lot of changes since I started this project and it is a better idea to grab the source from GitHub as it will be more up to date. I will leave the documents above so you can see how it's evolved and also how it works, maybe a bit clearer that it is now.
Next Steps
A useful next step for further developing the bare bones kernel outlined in this article is implementing capability for using the 'Image attributes on scalar types. This facilitates the printing of integers in string form, which is extremely useful for kernel debugging. A simple guide on how to accomplish this is detailed here.