972
edits
[unchecked revision] | [unchecked revision] |
(Some cleanup) |
m (Fix lint errors) |
||
(33 intermediate revisions by 25 users not shown) | |||
Line 1:
{{DISPLAYTITLE:x86-64}}
This article discusses '''x86-64''' CPUs (AMD64 and Intel's equivalent [[EM64T]] implementation). [[IA-64]] (Itanium) is '''really''' a different beast and not addressed here.
Line 5 ⟶ 6:
===Long Mode===
Long mode extends general registers to 64 bits (RAX, RBX, RIP, RSP, RFLAGS, etc), and adds
Long mode does not support hardware task switching or virtual 8086 tasks. In long mode the current CS determines if the code currently running is 64 bit code (true long mode) or 32 bit code (compatibility mode), or even 16-bit protected mode code (still in compatibility mode). Using paging has become mandatory, and segmentation has been stripped down for performance reasons.
Line 11 ⟶ 12:
The first 64 bit CPUs from both Intel and AMD support 40 bit physical addresses and 48 bit linear addresses.
=== Segmentation in Long Mode ===
Segmentation in long mode functions with a flat model with the exception of two registers: FS and GS. Setting the base address for these two segment registers is possible via two specific [[MSR|Model Specific Register (MSR)]]s, FS.base (C000_0100h) and GS.base (C000_0101h).
Additionally there is a long mode specific instruction called [[SWAPGS]], which swaps the contents of GS.base and another MSR called KernelGSBase (C000_0102h). This instruction is particularly useful for preserving kernel information for a specific logical processor core across context switches. '''Note: This is an exchange operation'''.
=== Further information ===
:''This feature overview is incomplete. Please see the [[http://en.wikipedia.org/wiki/X86-64
==Setting up==
Line 25 ⟶ 26:
===How do I detect if the CPU is 64 bits ?===
After calling CPUID with EAX=0x80000001, all AMD64 compliant processors have the longmode-capable-bit turned on in the extended feature flags (bit 29) in EDX. There are also other bits required by long mode; you can check them out in the CPUID docs in the [http://support.amd.com/us/Processor_TechDocs/24594.pdf AMD general purpose instruction reference] (Link dead, the original author probably meant "AMD64 Architecture Programmer’s Manual Volume 3: General Purpose and System Instructions", found here: http://developer.amd.com/resources/developer-guides-manuals/)
===How do I enable Long Mode ?===
The steps for enabling long mode are:
* Disable paging
* Set the PAE enable bit in CR4
* Load CR3 with the physical address of the PML4 (Level 4 Page Map)
* Enable long mode by setting the
* Enable paging
''Reference: [https://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-vol-3a-part-1-manual.pdf Intel 64 and IA-32 Architectures Software Developer's Manual], Section 9.8.5''
Now the CPU will be in compatibility mode, and instructions are still 32-bit. To enter long mode, the D/B bit (bit 22, 2nd 32-bit value) of the GDT code segment must be clear (as it would be for a 16-bit code segment), and the L bit (bit 21, 2nd 32-bit value) of the GDT code segment must be set. Once that is done, the CPU is in 64-bit long mode.
=== Are there restrictions on 32-bit code running in Legacy Mode ?===
x86-64 processors can operate in a legacy mode, they still start in real mode and 16 and 32 bit protected mode is still available (along with the associated Virtual 8086 mode). This means an x86 operating system, even DOS, will still run just fine. The only difference is that physical addresses can be up to 52 bits (or as many bits as implemented by the CPU) when PAE is used.
Line 46 ⟶ 49:
If you are running on a multi-processor system, you could send one processor a STARTUP IPI to a real mode memory address (see Intel MultiProcessor specification for more details) that loads a real mode program. The main problem with this approach is that it relies on multiple processors being present in the system.
===Entering Long Mode directly===
Protected mode must be entered before activating long mode. A minimal protected-mode environment must be established to allow long-mode initialization to take place. This environment must include the following:
Line 57 ⟶ 60:
There is also [[Entering Long Mode Directly|an example]] of this implemented in a [[bootloader]].
=== Notifying the BIOS ===
In order for the firmware built into the system to optimize itself for running in Long Mode, AMD recommends that the OS notify the BIOS about the intended target environment that the OS will be running in: 32-bit mode, 64-bit mode, or a mixture of both modes. This can be done by calling the BIOS interrupt 15h from Real Mode with AX set to 0xEC00, and BL set to 1 for 32-bit Protected Mode, 2 for 64-bit Long Mode, or 3 if both modes will be used.
== 64 bit Environment Models ==
Line 66 ⟶ 73:
ILP64 means Ints, Longs (and Long Longs) and Pointers are 64 bit wide.
Most *nixes use the
=== Data Types ===
Line 159 ⟶ 166:
|}
=== Text Segment Types ===
Another thing that you must keep in mind, that although the address space (and with it all the pointers) are 64 bit wide, the generated code in the text segment is most likely not. That's because by default gcc compiles to the "mov" instruction which has only 32 bit immediate. This means 64 bit programs are limited to 2G, just as 32 bit mode programs.
If you have ever seen an error message like this:
<syntaxhighlight lang="bash">
relocation truncated to fit: R_X86_64_32 against symbol
</syntaxhighlight>
then your code hit this barrier. For Assembly, you must use the "movabs" instruction instead of "mov", and for gcc you need to select a different text segment model with the "-mcmodel" argument.
{| {{wikitable}}
! Flag
! Text Segment Addressing
|-
| -mcmodel=small
| The program and its symbols must be linked in the lower 2 GB of the address space (this is the default model)
|-
| -mcmodel=large
| This model makes no assumptions about addresses and sizes of sections.
|-
| -mcmodel=medium
| The program is linked in the lower 2 GB of the address space. Small symbols are also placed there. Symbols with sizes larger than -mlarge-data-threshold are put into large data or bss sections and can be located above 2GB.
|-
| -mcmodel=kernel
| The kernel runs in the negative 2 GB of the address space. This model has to be used for Linux kernel code.
|}
It worth noting that code models are different for architectures, as they are tied with the instruction encoding. For example, AArch64 has a "-mcmodel=tiny" too, which allows 1M addressing, unknown to x86_64. And for AArch64 "-mcmodel=small" has a 4G limitation, not 2G as for the x86_64.
== See Also ==
Line 248 ⟶ 198:
* [[EM64T|Intel EM64T]]
* [[Creating a 64-bit kernel]]
* [[BOOTBOOT|BOOTBOOT bootloader]]
* [[Limine|Limine bootloader]]
* [[X86-64 Instruction Encoding]]
* [[
=== Wikipedia ===
Line 255 ⟶ 207:
* [[Wikipedia:64-bit|64-bit]]
=== External Links ===
* [http://www.amd.com/us-en/assets/content_type/DownloadableAssets/dwamd_AMD64_Porting_FAQ.pdf Porting to AMD64: FAQ]
* [http://www.amdboard.com/hammerspecial.html AMD64 Information]
* [http://www.x86-64.org/documentation.html x86-64 ABI and assembly guide]
* [http://downloads.openwatcom.org/ftp/devel/docs/elf-64-gen.pdf ELF-64 Object File Format (direct PDF link)]
* [http://stackoverflow.com/questions/1753602/registers-for-x86-64-processors StackOverflow x86_64 register assignment]
[[Category:X86 CPU]]
[[Category:X86-64]]
[[Category:Operating Modes]]
|