PC Screen Font
On every Linux distributions, you can find a lot of console fonts with the extension .psf or .psfu. You can find where they are located by entering "whereis consolefonts" into the Terminal. This article describes how to display those on graphical screen, which has the advantage that you don't have to mess with your fonts, you can directly use the ones shipped with your Linux. The other advantage is that PSF fonts can store the whole UNICODE character set, although consolefonts have maximum 512 glyphs usually.
There are two versions of PSF, PSF 1 and PSF 2. Each of these versions can be detected using their magic number. This page assumes a PSF 2 font is being used.
Structure of file
The PSF file itself consist of a header, bitmaps for the glyphs and optionally a unicode character translation table.
File Header
It's a fixed chunk at the beginning of the file. You will need to be able to detect the version before you begin parsing.
#define PSF1_FONT_MAGIC 0x0436
typedef struct {
uint16_t magic; // Magic bytes for identification.
uint8_t fontMode; // PSF font mode.
uint8_t characterSize; // PSF character size.
} PSF1_Header;
#define PSF_FONT_MAGIC 0x864ab572
typedef struct {
uint32_t magic; /* magic bytes to identify PSF */
uint32_t version; /* zero */
uint32_t headersize; /* offset of bitmaps in file, 32 */
uint32_t flags; /* 0 if there's no unicode table */
uint32_t numglyph; /* number of glyphs */
uint32_t bytesperglyph; /* size of each glyph */
uint32_t height; /* height in pixels */
uint32_t width; /* width in pixels */
} PSF_font;
Glyphs
Each glyph is a bitmap, encoded the same way as VGA Fonts. For a 8x16 font, each glyph is 16 bytes long, and every byte encodes exactly one row of the glyph.
00000000b byte 0 00000000b byte 1 00000000b byte 2 00010000b byte 3 00111000b byte 4 01101100b byte 5 11000110b byte 6 11000110b byte 7 11111110b byte 8 11000110b byte 9 11000110b byte 10 11000110b byte 11 11000110b byte 12 00000000b byte 13 00000000b byte 14 00000000b byte 15
Unicode Table
If the flags in the PSF header is 1, it indicates that the font has a unicode table for glyph mapping. Without such a table, unicode characters and glyphs are mapped identically, so first glyph is for unicode character 0, second glyph for unicode character 1 and so forth.
The table is as follows: each glyph has a variable length record. Those are very similar to lines in a text file, only here lines are ended in 0xFF character not '\n' (0x0A). The nth line describes the nth glyph's mappings. Every line contains at least one, but possibly more UTF-8 character sequences.
Dealing with PSF
Although there are lot of PSF editors out there, I've found all of them broken or hard to use. So I'd recommend two neat perl scripts instead: readpsf, writepsf. They can convert PSF into easily editable ascii text file or a bitmap image that can be opened with Gimp or Photoshop and vice versa.
Loading the font
As described in VGA Fonts, you have several options. For simplicity, we'll embed it. Here's how to convert PSF into an ELF so that you can link with your kernel:
objcopy -O elf64-x86-64 -B i386 -I binary font.psf font.o
readelf -s font.o
Symbol table '.symtab' contains 5 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 _binary_font_psf_start
3: 0000000000008020 0 NOTYPE GLOBAL DEFAULT 1 _binary_font_psf_end
4: 0000000000008020 0 NOTYPE GLOBAL DEFAULT ABS _binary_font_psf_size
As you can see the resulting object exports three symbols that can be referenced as any other variables.
Before we can use our font, first we have to decode the unicode table. That's a bit tricky to do, and you'll have to have calloc(), but the good news is it's optional. You can skip this if you're happy with the first glyph is for character 0, second glyph is for character 1, etc. scheme.
/* import our font that's in the object file we've created above */
extern char _binary_font_psf_start;
extern char _binary_font_psf_end;
uint16_t *unicode;
void psf_init()
{
uint16_t glyph = 0;
/* cast the address to PSF header struct */
PSF_font *font = (PSF_font*)&_binary_font_psf_start;
/* is there a unicode table? */
if (font->flags) {
unicode = NULL;
return;
}
/* get the offset of the table */
char *s = (char *)(
(unsigned char*)&_binary_font_psf_start +
font->headersize +
font->numglyph * font->bytesperglyph
);
/* allocate memory for translation table */
unicode = calloc(USHRT_MAX, 2);
while(s>_binary_font_psf_end) {
uint16_t uc = (uint16_t)((unsigned char *)s[0]);
if(uc == 0xFF) {
glyph++;
s++;
continue;
} else if(uc & 128) {
/* UTF-8 to unicode */
if((uc & 32) == 0 ) {
uc = ((s[0] & 0x1F)<<6)+(s[1] & 0x3F);
s++;
} else
if((uc & 16) == 0 ) {
uc = ((((s[0] & 0xF)<<6)+(s[1] & 0x3F))<<6)+(s[2] & 0x3F);
s+=2;
} else
if((uc & 8) == 0 ) {
uc = ((((((s[0] & 0x7)<<6)+(s[1] & 0x3F))<<6)+(s[2] & 0x3F))<<6)+(s[3] & 0x3F);
s+=3;
} else
uc = 0;
}
/* save translation */
unicode[uc] = glyph;
s++;
}
}
Displaying a character
I'll assume that you've set up linear frame buffer properly and you can plot a pixel from your kernel. This example uses 32 bit RGBA format, but can be adapted to other formats easily.
/* the linear framebuffer */
extern char *fb;
/* number of bytes in each line, it's possible it's not screen width * bytesperpixel! */
extern int scanline;
/* import our font that's in the object file we've created above */
extern char _binary_font_start[];
#define PIXEL uint32_t /* pixel pointer */
void putchar(
/* note that this is int, not char as it's a unicode character */
unsigned short int c,
/* cursor position on screen, in characters not in pixels */
int cx, int cy,
/* foreground and background colors, say 0xFFFFFF and 0x000000 */
uint32_t fg, uint32_t bg)
{
/* cast the address to PSF header struct */
PSF_font *font = (PSF_font*)&_binary_font_psf_start;
/* we need to know how many bytes encode one row */
int bytesperline=(font->width+7)/8;
/* unicode translation */
if(unicode != NULL) {
c = unicode[c];
}
/* get the glyph for the character. If there's no
glyph for a given character, we'll display the first glyph. */
unsigned char *glyph =
(unsigned char*)&_binary_font_psf_start +
font->headersize +
(c>0&&c<font->numglyph?c:0)*font->bytesperglyph;
/* calculate the upper left corner on screen where we want to display.
we only do this once, and adjust the offset later. This is faster. */
int offs =
(cy * font->height * scanline) +
(cx * (font->width + 1) * sizeof(PIXEL));
/* finally display pixels according to the bitmap */
int x,y, line,mask;
for(y=0;y<font->height;y++){
/* save the starting position of the line */
line=offs;
mask=1<<(font->width-1);
/* display a row */
for(x=0;x<font->width;x++){
*((PIXEL*)(fb + line)) = *((unsigned int*)glyph) & mask ? fg : bg;
/* adjust to the next pixel */
mask >>= 1;
line += sizeof(PIXEL);
}
/* adjust to the next line */
glyph += bytesperline;
offs += scanline;
}
}
With this you can display strings on a linear frame buffer just like Linux does on it's ttys. Please note that this code is not optimal, it's for demonstration purposes, but it's a good start.
Calculating the offs with width + 1 is necessary to keep one pixel distance between glyphs on screen. Without some fonts became unreadable. This is also what the original VGA hardware did, it used 8x16 fonts, but actually displayed them as 9x16. Casting glyph before anding with the mask is necessary to support font widths up to 32 pixels.
Using 8 pixel width would require an unsigned char, but 9 pixels an unsigned short. This way you can have single code even though you don't know the required size at compilation time (as it depends on the font loaded).
You might be tempted to replace PIXEL and line with an array, but that won't work on all hardware, as scanline is given in bytes, and nobody actually said that it must be a multiple of PIXEL (very unlikely, but possible).
See Also
- VGA Fonts
- Scalable Screen Font - comes with a small, free ANSI C rendering library
- Loading Icons
External Links
- http://www.win.tue.nl/~aeb/linux/kbd/font-formats-1.html PC Screen Font format description
- https://en.wikipedia.org/wiki/PC_Screen_Font Wikipedia on PC Screen Font
- https://github.com/talamus/solarize-12x29-psf/blob/master/readpsf Perl script to convert PSF into txt or bmp.
- https://github.com/talamus/solarize-12x29-psf/blob/master/writepsf Perl script to convert txt or bmp into PSF.